Hose Clamp Manufacturers Blog

Hose Clamp Types – Different Types of Hose Clamp

What is HOSE CLAMP?

A hose clamp is created to tight a hose on top of a component by fastening the hose down. They are also known as hose clip or hose lock. They are used to fix and seal a hose onto a fitting like a barb or a nipple. This assists in averting the fluid in the hose discharging at the tie. Desired extensions comprise whatever like car engines to bathroom fittings. Moreover, hose clamps are utilized in a diversity of different industries to secure the shipment of products, liquids, gases, and chemicals. Hose clamps are normally packed in a box that is divided into different compartments for every size. To prevent them from cutting off the hose and tube, they are fitted with a smooth band with rolled edges. There are several categories of hose clamps. These are the screw or band, spring, wire, and ear. Each one of them is used depending on the type of hose in question and the attachments at the end. Normally, screw or band hose clamps tend not to be used for ultra-high-pressure scenarios, but instead, they are used mostly in low-pressure environments, as well as a quick fix is needed, more so within the home. Hose clamps are becoming standard in the industry in all hose-clamp uses.

Hose clamp type

There are various types of hose clamps. Each one of the hose clamps has a specific use to prevent leaks. These include;

T-Bolt Hose Clamps

These clamps are also referred to as racing clamps. They are contemplated a faster release clamp presenting an extensive steel band and a captive T-bolt that is screwed up by a hex nut. The T-bolt hose clamps are created to give a constant fastening pressure providing a connection that is leak proof. T-bolt hose clamps can be found in a vast display of high vibration, huge diameter surroundings together with industrial, commercial, and military use. The T-bolt hose clamps have limitations ranging from giving an even 360-degree clamping power. It is recommended for use in unreachable areas, and its broadband decreases the risk of leaks and blowouts. It is very easy to install with common hand tools. It comes with stainless steel bands for corrosion resistance.

Spring hose clamp

These clamps at times are known as constant tension clamps. They are broadband, spring steel hose clamps that gives the same pressure on fittings. Its quality enables it to keep Constance tension as joints and dwindle with temperature changes. Spring hose clamps are mostly used on OEM cooling apparatus in the automotive industry. The spring hose clamp is advantageous in that it can be fixed or unfastened by common hand tools by the specialty tool. OEM substitution for cooling apparatus. Has 360-degree unchanged pressure systems and its broadband decreases the possibility of leaks.

Worm drive hose clamp

Worm drive hose clamp is also known as radiator clamps, jubilee clips, worm gear hose clamps, or screw hose clamps. They are the widely used technique of hose clamp. They are created with a captive worm gear screw fitted to a steel band. The band presents a gap that can either run the whole length or incomplete length of the band depending on the application’s need. The screw thread of the worm gear screw wire together with the gaps in the band granting the band diameter to add or reduce as the screw is fixed or loosened. It uses static tension to the fixing.

Double wire hose clamp

Double wire hose clamp is a spring steel hose clamp designed from round wires to give constant tension on hose fixing. Double wire hose clamp is mostly used for low pressure. Double wire hose clamp performs perfectly in locations that are difficult to reach. Double wire hose clamp is usually used on vacuum lines in automotive uses. Double wire hose clamp is very easy to fix using common hand tools. They give a 360-degree of constant tension. They are also available in single wire configurations. They inflate and shrink with fittings with the change of temperature.

Lock hose clamp

Lock hose clamp is made up of a galvanized steel. These lock hose clamps are made up of various designs. Lock hose clamp are anti-corrosive and have a flawless finish. Besides they are used for aircraft and consequential industrial execution. They are also used for securely clamping flexible hoses when carrying out automotive diagnostics or repairs. They are made up of durable materials. Lock hose clamp are used in the water industry, air conditioning, construction, and sanitary. Lock hose clamp have a broad wide clamping range.

Uses of a hose clamp

A hose clamp is used to fix and secure a hose into a fitting such as a barb or nipple. Hose clamp is widely used in various industries so that they can secure the shipment of products, liquids, gases, and chemicals. Besides, hose clamps are used for fixing flexible hoses to solid fittings. Hose clamps are also used for carrying out air and fluids. Hose clamp is used in fixing bike lights, changing the focus on DSLR cameras, quirky DIY jewelry, and home decorations.

Hose clamp used in the automobiles industry

Hose clamps are generally used in automobile industries. Mostly they are used in the HD industry for exhausts and turbo fittings. This application is normally done for both passenger and commercial vehicles. They are used in high mechanical loads. Hose clamps are more precisely used to transport media in cooling water and heating appliances. they are used as connecting products for fluid and gas in commercial vehicles and various industrial uses.

Hose clamp used in the oil and gas industry

The hose clamps are used to renovate a damaged sub-sea pipeline by shifting the structural load of the damaged section on to the clamp body. They are used for restoring line weakness, leak, deformation, blockage, rupture, line corrections and to increase effectiveness. Consequently, they are used for mechanical sealing of emergency repair work, corrosion gaps, cracks, axial dents, and girth weld defects. Hose clamps are designed to fasten the bolt hole, hydraulic cylinder mounts. They are very advantageous in sealing mechanism safe for sour gas and other corrosive materials.

Hose clamp use in agriculture

In farming machines such as crop-sprayers, slurry-spreader, and seed drills all use hose clamps for them to function properly. They are normally fixed on the boom arm of a tractor-mounted crop sprayer. In the slurry spreaders, hose clamps are used to secure main hoses from the tank. The succession hoses on the seed drills are all fixed with hose clamps. They are used in hoses running between storage tankers. Hose clamps ensure the smooth running of tasks in the liquid fertilizers, pesticides, and other liquids used for agricultural purposes.

Hose clamp use in plumbing

Hose clamps are used to support different diameters of pipeline skillfully and secure in place. They are used as part of an interior plumbing and drainage system to secure wastewater conduit. They are also used to affix to the fascial boards of exterior roofing to collect rainwater. They are tightened around the hose and the fitting. They prevent the hose from sliding off the hose barb. They also give concentrated compression on the hose pipes.

Hose clamp use in gardening

Hose clamps are used to repair damaged garden hoses. They are used to connect water hose ends. This is very important especially when the area you want to water is huge. Hose clamp prolong the life of your garden hose. Hose clamp attached hoses pipes joints to fittings to prevent flow leakage of water when gardening. The hose clamps are used to make a beautiful garden

Hose clamp used in the chemical industry

The hose clamp in the chemical industry is used in the petrochemical for the delivery of high concentrations of chemical products, combustible aromatics, hot oils, and solvents. Hose clamp are used in the industries of liquid tankers chemical oil and foods. Hose clamp are also used in an explosive atmosphere. Hose clamp are used for the delivery of wax, asphalt, and other viscous media. Used for disinfection at 150 degrees centigrade. Also used for handing varnish, pigments, inks, and solvents. Convey industrial waters and water purification systems, delivery of air, hot water, and non-aggressive chemicals.

Can you reuse spring hose clamps?

The spring clamps contain stops that will not let over expansion. They can be used again as many times as you wish as long as they are not abused.  They are much faster for factory fittings. Spring hose clamps are the best as compared to screw style through the cool cycles of a hose. In some parts of the world, spring clamps are prone to corrosion hence they have a very short life span. At some times they totally crack and breakdown as well.

Do hose clamps go bad?

Hose clamps can become obsolete over time and cause some damages to wherever you are using them. They should be analyzed and replaced when servicing. Bad clamps can cause engine failure due to overheating in automobiles. Looking for the right size of hose clamps will prevent the issues of overheating. Caution needs to be taken when removing them because this could cause breaking. Hose clamps made from metals that corrode cannot be used once they rust.

How to unlock a spring hose clamp?

When unlocking the spring clamp, find the two prongs that extend from the ring-shaped surface of the clamp. Get a pair of pliers and modify them to a setting that will get them to open broadly on the distance between the prongs. Open the pliers and put them around both the prongs to press them together. After pressing them the clamp will expand in diameter. Proceed to manage pressure on the prongs and work the clamp side by side up to when you can unlock it.

Can you reuse pinch clamps?

Pinch clamps can be used again but make sure you maintain them on the hose where they were. It is 100% recommended to be reused provided it is not corroded or has tension. Make sure to check them out to ensure they are not getting corroded especially if they are poorly coated. They can fail due to rust. Pinch clamps self-adjust themselves as temperatures rise or fall since they are fitted with a thermostat.

How do you use a spring hose clamp?

Spring hose clamps are used in automobile producers on cooling system hoses. This is because they apply constant tension on the rubber hose. Because hoses get older and begin to wear and tear, they may be hardened, softened, swollen, or lose their structural rigidity the spring clamps will continue to put pressure on the hose even if the condition of the hose is bad.

How do you tighten a clamp?

Slide the hose clamp over the hose that you wish to tighten. Slip the hose onto the fitting, and then slide the clamp into position over both. Turn the clamp to have an easy approach to the driver. Clamps are tightened by compressing them with one hand so that the end opposite the driver slides into the sleeve clenching the driver. Rotate the driver rightward with the screwdriver or wrench so that the threads on the driver engross the slots on the clamp. Carry on with turning the driver until the clamp tightens around the hose securely.

How do you drill through a hose clamp?

When you want to drill through a hose clamp you need first of all to have the right materials. You require a clamp itself, a rivet, and a screw. Mark where you need to drill with a rivet. Use a drill that corresponds to the diameter of your rivet to drill a hole in the clamp. To secure the drill bit from walking, use a metal punch and a ball-peen hammer to dent the clap. Finally, drill the hole.

How do you adjust the worm gear clamp?

Rotate the head of the worm fear screw on the right to fasten using a screwdriver or the 5/16-inch nut driver. The worm gear screw meshes with the slots in the band to draw it compacted on every side of the hose as the worm gear screw is revolved. Finally, adjust the worm gear clamp to your desired level for better results.

How do you make a hose clamp?

Hose clamps are simple and easy to make at home. The materials needed depends on the type of hose clamp that you need. For example, to make a wire hose clamp, you need a wire cutter, pliers, and a stainless-steel wire, and a riveter of a brand of your choice. You also need a hose and a hose bard. The steps would include;

Step 1;

Cut the wire at least 15” long, fold it in half, thread the ends through the loop, twist the wire uniformly to give the riveter a good grip on it.

Step 2:

Fasten the wire over the hose ensuring It is straight all the way around and tightens on the barb. Click the riveter, tightening the wire.

Step 3:

Cut off the wire allowing about 14 inches to stick out. Separate the ends that one goes on each side of the double wire. Use the cutters to bend the ends 1/8” down to enter the hose so they will not cut you in the future.

Step4:

Use the pliers to bend down the ends and penetrate the hose. You will now have a smooth hose clamp that will not snag on anything.

How do you release a hose clamp?

If you want to release a hose lamp, the following procedure should be followed;

Step1:

Depressurize or de-energize the system with the hose that you want to release.

Step2:

Snip the clamp by use of a diagonal cutter. Use the cutters to peel off the clamp remains from the hose, if possible as the clamp can embed itself into the hose over a period of time.

Step3:

Fit a new screw-type hose clamp on the hose, then install the hose. Rotate the clamp and secure it in a position that enables you to easily access the screw.

By the use of a screwdriver, fasten the hose securely. Do not over-tighten the screw as it can get damaged or strip out the screw rendering the clamp useless.

 

How do you crimp a hose clamp?

Hose clamps are crimped using a special tool to allow for strong clamping pressure. Initially, they were used mostly on components that are no frequently replaced. To crimp the hose clamp you need to snip the crimped ear off the clamp. Put a new screw-type hose clamp on the hose and then tighten it securely with a screwdriver.

How do you use flexible hose clamp pliers?

Attach the flexible hose clamp plier swiftly into the clamp tab and squeeze it to open. Hold the clamp in the open location to enable you to slip it down a hose or onto a fitting without losing the grip. The clamp holding jaws are arranged to avert bending or warping clamps so that one can reuse them again if so required. The clamp has low profile handles for an easier fit in tight space. The jaws lock open as needed to hold the clamp at desired diameter for removal or installation.

How do you cut a clamp off?

First of all, the location where you want to cut the clump off needs to be dry. Loosen the screw on the clamp by turning it clockwise with a slotted screwdriver or a nut driver for a band style hose clamp. Just tap the clamp on the band and it will cut right through. Do not cut the hose much. You can use nibblers to cut the metal band. Use nibblers and large wire cutters. Cut the band where it bends to accommodate the screw for clamping.

How do I loosen my AC clamp?

To be able to loosen the AC clamp, you need to empty the radiator of coolant, or antifreeze. Turn it anti-clockwise. This will depend on your position. Begin by unscrewing the clamp slowly, so that you will be able to feel it loosening.

Conclusion

Hose clamps are of a different type. Any type of hose clamp depends on the location and the purpose for which you are buying it for. There are certain factors that one needs to consider when purchasing any of the different types of hose clamps.

  1. First of all, it is good to look for the best quality made from durable materials. A hose clamp should be corrosion-free.
  2. Portability is another character that one needs to consider for a good hose clamp. Hose clamps should not be too bulky.
  3. All the hose clamps should be able to decrease the chances of leaking in whatever place they are being used.
  4. They should be able to provide excellent strength and the ability to adjust when there are fluctuations in temperatures.
  5. Besides, clamps should provide permanent connections and emergency repairs.

As seen above, clamps are useful for our days to day work. Numerous industries use them such as automotive, agriculture, and marine industries. Hose clamps are basically used to secure hoses in automobiles, radiators, bathrooms, and many more. Hose clamps guarantee a tight seal between the hose and its fittings. Hose clamps are of wide range, small and large. They are durable and cost effective. Hose clamp attaches and seals a hose to it perfect place. Therefore, hose clamps are created to make your work easier and more enjoyable minus leaks in any fittings that you may have done. From vehicle hoses to shower hoses clamps are a lifesaver for keeping liquid, gases, or chemicals flowing through the hose and not outside of it. There are also swimming pool hoses which are extremely important. Finally, it is important to state that each hose clamp works best on its appropriate hose and the attachment at the end of it.

Leave a Reply

Your email address will not be published. Required fields are marked *